SCYTHE Fuma 2 navazuje na konstrukční princip svého předchůdce a
nabízí výkonný dvou věžový radiátor s kompletně přepracovaným,
asymetrickým designem. Šest vysoce kvalitních tepelných trubek 6 mm
spojuje oba chladiče s pevnou měděnou základovou deskou. Všechny
měděné části byly bohatě poniklovány. Asymetrická orientace a
vybrání na zadní straně druhého chladicího bloku umožňují neomezené
použití všech paměťových bank. Fuma 2 je dodáván se dvěma fanoušky
PWM z populární série Kaze Flex. Kromě běžného modelu je také
použita nová štíhlá verze s šířkou rámu 15 mm. Fuma 2 využívá
princip "Dual Fan Reverse Airflow" designu, ve kterém se
ventilátory otáčejí v opačných směrech. To vytváří vyšší statický
tlak a zvýšený a stabilnější průtok vzduchu. Pro další maximalizaci
chladicího výkonu lze namontovat další ventilátor. Dodávané
montážní držáky jsou součástí dodávky.
SCYTHE FUMA 2
The Fuma 2 follows the design principle of its predecessor and
offers a powerful twin-tower radiator with a completely revised,
asymmetrical design. Six high-quality 6 mm heatpipes connect the
two heatsinks to the solid copper baseplate. All copper parts were
lavishly nickel plated. The asymmetric orientation and a recess on
the back of the second cooling-block allow unrestricted use of all
memory banks. The Fuma 2 comes with two PWM fans from the popular
Kaze Flex series. In addition to a regular model, a new slim
version with a frame width of 15 mm is also used. The Fuma 2 uses
the principle of the "Dual Fan Reverse Airflow" design, in which
the fans rotate in opposite directions. This creates a higher
static pressure and an increased and more stable air flow. To
further maximize cooling performance, an additional fan can be
mounted. The required mounting brackets are included.
Twin-Tower-Design
The classic twin-tower design of the Fuma 2 is not centered
directly above the CPU socket, but offset by inclined heatpipes.
This asymmetrical design provides maximum space for the memory
banks. Also the cooling fins of the second tower are aligned in
such a way that even memory banks on both sides of the CPU socket
can be operated without problems, without restricting the
effectiveness of the heat sink. Despite the enormous cooling
surface of the Fuma 2 remains at a height of 154.5 mm and fits into
any standard PC case.
Dual Fan Reverse Airflow
The Fuma 2 CPU cooler comes with two fans, a Kaze Flex 120 and a
Kaze Flex Slim 120, which rotate in opposite directions. This
creates a higher static pressure and an increased and more stable
air flow. Furthermore a third fan can be mounted for extra power.
Additional fan brackets are included.
Kaze Flex Fans
Both the regular model as well as the Kaze Flex Slim fan use a
sealed fluid dynamic bearing (Sealed Precision FDB) that reduces
friction and wear to a minimum thanks to a special oil film.
Rubberized bearing surfaces have a decoupling effect and prevent
the transmission of noise and vibrations.
H.P.M.S. III (Hyper Precision Mounting System III)
The Fuma 2 CPU cooler uses the proven H.P.M.S III mounting system.
A pre-assembled mounting bar with spring-loaded screws ensures
balanced pressure distribution. During the installation, the
adaptable backplate is securely held to the mainboard by rubberized
spacers, making the process considerably easier. The mounting
system offers full compatibility with all current sockets including
AMD's AM4 and Intel's LGA 2066.
Model Name:
FUMA 2 CPU Cooler
Model Number:
SCFM-2000
EAN: 4571225057200
Compatibility:
Intel®:
Socket LGA775
Socket LGA1150
Socket LGA1151
Socket LGA1155
Socket LGA1156
Socket LGA1366
Socket LGA2011 (v3)
Socket LGA2066
AMD®:
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket AM4
Socket FM1
Socket FM2
Socket FM2+
Please note that an original backplate with screw mounting is
needed for installation on mainboards with AMD sockets. Please
check before buying if the backplate is fixed by screws (example)!
If the backplate uses plastic-pins, mounting of this cooler is not
possible.
Overall Dimensions:
137 x 131 x 154,5 mm (including fan)
Weight:
1.000 g / 33,8 oz
Accessory:
Installation material for Intel™ and AMD™ Socket, thermal grease,
fans, fan clips, installation manual, Y-PWM-cable, screwdriver
Baseplate Material / Heatpipes:
Nickel-plated copper (additional information)
Fan Specifications
Model Name:
Kaze Flex 120 Slim PWM (Fan 1)
Kaze Flex 120 PWM (Fan 2)
Model Number:
SU1215FD12H-CNP
SU1225FD12M-CHP
Dimensions:
120 x 120 x 17 mm
120 x 120 x 27 mm
Noise Level:
2,7 ~ 23,9 dBA
4,0 ~ 24,9 dBA
Air Flow:
8,28 ~ 33,86 CFM - 18,40 ~ 75,24 m3/h
16,6 ~ 51,17 CFM - 36,89 ~ 113,71 m3/h
Fan Speed:
300 (±200 rpm) ~ 1.200 rpm (±10%) (PWM-controlled)
Static Pressure:
2,26 ~ 8,83 Pa / 0,23 ~ 0,9 mmH2O
0,75 ~ 10,3 Pa / 0,762 ~ 1,05 mmH2O
Bearing Type:
Sealed Precision FDB
Max. Power Consumption:
2,16 W
1,56 W
Voltage:
12 V
Amperage:
0,18 A
0,13 A